RCD / Safety Switch Testing

Complete Peace of Mind on Every Switchboard.

Fast, precise RCD push-button and trip-time testing (AS/NZS 3017 & AS/NZS 3760) across Mackay and Paget.

An untested RCD can fail silently — offering zero protection. Don't assume it works until it's been tested.

Your Safety Switches Deserve More Than a Guess

Your safety switches (RCDs) are the front line of protection for your staff and workplace. Over time, dust, humidity, and everyday wear can slow down an RCD's mechanical trip mechanism. Rather than leaving your switchboards to guesswork, our licensed electricians test both fixed switchboard RCDs and portable safety switches using calibrated digital instruments — confirming that every switch trips within the strict milliseconds required by Australian Standards.

Under AS/NZS 3017 and Queensland workplace health and safety legislation, RCDs must be regularly tested to confirm they trip within the required time threshold. This applies to fixed RCDs in switchboards, portable RCDs used on construction sites, and RCDs built into power boards and extension leads.

NQ Electrical & Testing carries out push-button and trip-time testing on all RCD types using calibrated test equipment. Every test is recorded and you receive a compliance report the same day.

How We Make RCD Testing Easy

Planned Around Your Operations

Because RCD trip testing briefly isolates power to a circuit, we schedule switchboard checks before opening, during lunch breaks, or after hours so servers and point-of-sale systems stay online.

Calibrated Millisecond Accuracy

Using advanced Metrel testing equipment, we log exact trip times and ramp currents for every circuit.

Audit-Ready Documentation

Your RCD test results are seamlessly included in your same-day digital PDF compliance register for WHS auditors, landlords, and insurers.

RCD Types We Test

Fixed Switchboard RCDs

Permanently installed safety switches in your main switchboard or sub-boards — tested in-situ with no disruption to your operations.

Portable RCDs

Plug-in and inline portable safety switches used on construction sites, in workshops, and with outdoor equipment.

RCD-Protected Power Boards

Power boards and extension leads with built-in RCD protection — visually inspected and electrically tested.

Socket-Outlet RCDs

RCD-protected socket outlets installed in bathrooms, kitchens, outdoor areas, and other high-risk locations.

Who Needs RCD Testing

Construction & Civil

Portable RCDs are mandatory on all Queensland construction sites. We test and tag every device to keep your site compliant and your workers safe.

Mining & Resources

High-risk environments with strict electrical safety obligations. We work around shift patterns and operational requirements.

Commercial Workplaces

Offices, retail stores, hospitality venues, and any workplace with fixed or portable RCDs requiring periodic testing.

Industrial & Manufacturing

Factories, workshops, and processing facilities with high equipment loads and complex switchboard configurations.

Healthcare & Aged Care

Facilities with critical electrical safety requirements and strict documentation obligations for accreditation.

Property & Strata

Common-area switchboards, car parks, and shared facilities requiring regular RCD compliance checks.

Our Testing Process

01

Site assessment

We identify all RCDs on site — fixed, portable, and socket-outlet types — and confirm the correct test standard for each.

02

Push-button test

Each RCD is manually triggered using its test button to confirm the mechanism operates and power is interrupted.

03

Trip-time test

Using calibrated test equipment, we measure the exact trip time in milliseconds to confirm it meets the AS/NZS 3017 threshold.

04

Tag & record

Passed RCDs are tagged with the test date and next due date. Failed devices are clearly marked and removed from service.

05

Same-day PDF report

A full compliance report is delivered the same day — listing every RCD tested, its trip time, result, and next test due date.

Recommended Testing Intervals

Intervals are set by AS/NZS 3017 and vary by environment. We'll confirm the correct interval for your site.

Construction Sites

Every 3 months

Industrial / Mining

Every 6 months

Commercial Workplaces

Every 12 months

Fixed Switchboard RCDs

Every 12 months

Fully documented — same day

Every RCD test is recorded with the device ID, location, trip time in milliseconds, pass/fail result, and next due date. Your PDF compliance report is ready the same day — suitable for your safety file, insurer, or WorkSafe Queensland audit.

  • AS/NZS 3017 compliant testing methodology
  • Calibrated RCD trip-time test equipment
  • Push-button and instrument testing performed
  • QLD Electrical Contractors Licence: 1513828
  • $5,000,000 public liability insurance
  • Failed RCDs clearly marked and removed from service

Book Your RCD Safety Check

We'll confirm a time that works around your site — including after hours and weekends.